https://www.youtube.com/@GQ-247
Track prepped, event hosted by, and coaching supplied by Gear247 crew.

Very enjoyable Labor Day Weekend!

SA-72R 17"x9.5"+47mm
Nankang CR-S v2

Oops, did not scrub them in.
"The Nankang AR-1, CR-S, SL-1, and NS-2R will greatly benefit from an initial “break-in” heat cycle, (commonly called “scrubbing in”) before the tires are pushed, for better performance. Set cold air pressure at an adequate psi to handle the weight of the car. On track, gradually increase speed subsequently for a minimum 3-4 laps, not to exceed 85% capacity*, followed by an off the car cooling period of not less than 24 hours, which will result in a much improved tire life and on track performance for future sessions.
2 – laps 50%, 1 – lap 75%, 1 – 85%, 2 – cool down laps 50%"